19

2026

-

11

Swiss Type Lathes for Small Precision Parts


A Swiss type lathe turns small parts from bar stock while the bar is held close to the cutting tool. WINNRUI CNC lists the Swiss-type lathe in its lathe range next to heavy duty and long stroke traditional lathes. This article explains the working principle, the jobs the machine suits and the points to confirm when a workshop adds one to its turning cell.

What Defines a Swiss Type Lathe

On a Swiss type machine the headstock moves along the guideway and feeds the bar through a guide bushing. The cutting tools work close to the bushing, so the unsupported length of the bar stays short. A short overhang reduces deflection, and that is the main reason the design is used for small parts with tight tolerances.

The machine can carry several tools at once. Turning, milling, drilling and parting tools are arranged around the bar, and the part can often be finished in one cycle instead of moving between several machines. For a part that needs a milled flat, a cross hole and a turned diameter, one setup reduces the handling and the waiting time.

Where the Machine Fits

The design suits parts that are small in diameter and moderate in length: connectors, pins, bushes, sensor bodies, medical components, small shafts and fittings. A workshop that makes these parts in large batches can keep the machine running for a long period with one setup.

For a mixed workshop, the Swiss type lathe can sit beside vertical machining centers, horizontal machining centers and gantry machining centers. A part may be turned on the Swiss machine and then finished on a machining center, or the reverse. WINNRUI CNC produces all of these machine types, so a buyer can plan the cell with one supplier.

Selecting the Right Model

Start with the bar diameter and the longest part the shop expects to run. Then list the operations: plain turning, facing, grooving, threading, cross drilling, off-center milling and parting. The number of axes and the number of tool stations should follow that list, not the other way round.

Check the bar feeder, the guide bushing and the tool holders as part of the same decision. A machine with a large tool count but no space for the planned tools is less useful than a smaller machine with the right holders. Ask for a sample part run with the material the shop uses, and check the cycle time and the surface finish.

Quality Checks at WINNRUI CNC

WINNRUI CNC states that it follows the ISO9001 quality management system and controls the process from design verification and supply chain management to assembly and commissioning. Each machine tool is described as undergoing a 72 hour continuous processing test, laser interferometer accuracy detection and temperature rise and vibration analysis before it leaves the factory.

The company also states that it provides a three-year warranty for core components and a 24 hour online response with regional technical service teams. For a buyer, these points should be written into the order: the test record, the accuracy report, the warranty list and the response time. A clear spare parts list should be agreed at the same time.

Shop Preparation

Before the machine arrives, confirm the floor space, the power supply, the compressed air and the chip and coolant handling. A Swiss type lathe produces fine chips, so the chip conveyor and the coolant tank should be sized for the material. Keep the bar feeder area clear so a new bar can be loaded without reaching over the machine.

Plan the first parts. A simple part with a few features is a good way to prove the setup, the tool offsets and the program before a complex job is released. Record the tool list, the offsets and the program number for each part so the next run starts from a known state.

Range and Contact

WINNRUI CNC is located at No 83 Yezhuang Road, Hengliang Street, Liuhe District, Nanjing City, Jiangsu Province, China. The company specializes in vertical machining centers and also produces gantry machining centers, horizontal machining centers and automation equipment. Its machines are listed for automotive and motorcycle, 3C electronics, new energy, mold, construction machinery, valve, medical and aerospace work.

To request a quotation for a Swiss type lathe, send the part drawing, the bar material and diameter, the batch size and the required tolerance. State the operations and the control family you prefer, and ask for a sample run if the part is new to the shop. Our team will confirm the model, the tooling and the delivery plan.

You can contact WINNRUI CNC by email at sales@bjbod.com or by phone at 8615522553731. We will reply to a complete inquiry with the machine configuration, the price and the lead time.

Other Blogs


Get A Free Quote

We will contact you within one working day. Please pay attention to your email.

Submit Now
%{tishi_zhanwei}%